ZPKS connection set enables a reliable connection of flat plate collectors to the installation piping system.
ZPKS1 = 1 collector
ZPKS2 = 2 collectors
ZPKS3 = 3 collectors
etc.
Home » Tarvikkeet
Tarvikkeet
Pulverilakattu (RAL 7022 harmaa-ruskea) teline on valmistettu alumiinista ja galvanoidusta teräksestä, joka kestää kovassakin tuulessa.
TASOKÄRIMET
| Kuva | Nimi | Tuotenro. |
 |
KSOL-2/2000/2100 Universal Handle (for first two collectors) is made of aluminum and galvanized steel. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination of at least 30° with respect to horizontal plane. It is powder painted in grey and brown (RAL 7022). VIDEO |
21.42.02 |
 |
KSOL-1/2000/2100 Universal Handle (for an additional collector) is made of galvanized steel and aluminum. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination of at least 30° with respect to horizontal plane. KSOL-1/2000/2100 Universal Handle is painted in RAL 7022 (grey and brown). | 21.42.01 |
 |
KSAL-2/2000/2100 Universal Handle (for first two collectors), is made of aluminum and stainless steel. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination of at least 30° with respect to horizontal plane. It is powder painted in grey and brown (RAL 7022). | 21.32.02 |
 |
KSAL-1/2000/2100 Universal Handle (for an additional collector), is made of aluminum and stainless steel. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination of at least 30° with respect to horizontal plane. It is powder painted in grey and brown (RAL 7022). | 21.32.01 |
 |
KKSOL-2/2000/2100 Adjusting Handle (for first two flat plate collectors) is made of galvanized steel and aluminum. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination between 20° to 30° with respect to horizontal plane. The upper hooks are adjustable in order to increase the inclination of the collector by maximum 10° with respect to the roof plane. KSOL-2/2000/2100 Adjusting Handle is painted in RAL 7022 (grey and brown). | 21.52.02 |
 |
KSOL-1/2000/2100 Adjusting Handle (for an additional collector) is made of galvanized steel and aluminum. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination between 20° to 30° with respect to horizontal plane. The upper hooks are adjustable in order to increase the inclination of the collector by maximum 10° with respect to the roof plane. KSOL-1/2000/2100 Adjusting Handle is painted in RAL 7022 (grey and brown). | 21.52.01 |
 |
KSOL-2/2000/2100 Universal Construction (for first two flat plate collectors) is made of galvanized steel and aluminum. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination below 20° with respect to horizontal plane or horizontal plane itself provided it is solid (e.g. concrete). The constituent elements of the construction are painted in RAL 7022 (grey and brown). VIDEO |
22.22.02 |
 |
KSOL-1/2000/2100 Universal Construction (for an additional collector) is made of galvanized steel and aluminum. It is used for mounting flat plate collectors on roofs or other planar surfaces with inclination below 20° with respect to horizontal plane or horizontal plane itself provided it is solid (e.g. concrete). The constituent elements of the construction are painted in RAL 7022 (grey and brown). | 22.22.01 |
 |
Ground Basis is suitable for mounting both flat plate and evacuated tube collectors. It consists of two pieces of supports and is essential when placing the collectors on the ground by means of universal construction (KSOL or KSRL). | 22.20.02 |
 |
Flashing for 2 collectors (SET no. 1, symbol: F65163) is to be ordered in each case of mounting collectors on the roof slope, as a basic set. It is used for mounting 2 collectors in one battery or supplemented with other sets for mounting larger numbers of collectors.Specific instructions for ordering the necessary number of fitting sets, depending on the number of solar collectors, are provided in the image on the left.VIDEO | 27.01.00 |
 |
Flashing for additional collector (SET no. 2, symbol: F65164) is to be ordered in the case of mounting 3 or more collectors next to each other on the roof slope.Specific instructions for ordering the necessary number of flashing sets, depending on the number of solar collectors, are provided in the image on the left. | 27.01.02 |
TYHJIÖPUTKIKERÄIMET
| Kuva | Nimi | Tuotenro. |
 |
KSRL-2 Universal Handle (for first two collectors) is made of stainless steel and is intended for mounting KSR10 evacuated tube collectors on roofs or other planar surfaces with inclination greater than 30° with respect to horizontal plane. | 21.62.02 |
 |
KSRL-1 Universal Handle (for an additional collector) is made of stainless steel and is intended for mounting KSR10 evacuated tube collector on roofs or other planar surfaces with inclination greater than 30° with respect to horizontal plane. | 21.62.01 |
 |
KSRL-2 Adjusting Handle (for first two collectors) is made of galvanized steel and it is painted in RAL 7022 (grey and brown). The handle is used for roofs or other planar surfaces with inclination between 20-30° with respect to horizontal plane. The upper hooks (galvanized steel, non-painted) have an adjustable height, which allows for increasing the slope of KSR10 evacuated tube collectors by up to 10° with respect to the roof plane. | 21.72.02 |
 |
KSRL-1 Adjusting Handle (for an additional collector) is made of galvanized steel and it is painted in RAL 7022 (grey and brown). The handle is used for roofs or other planar surfaces with inclination between 20-30° with respect to horizontal plane. The upper hooks (galvanized steel, non-painted) have an adjustable height, which allows for increasing the slope of KSR10 evacuated tube collectors by up to 10° with respect to the roof plane. | 21.72.01 |
 |
KSRL-2 Universal Construction (for first two collectors) is made of galvanized steel and aluminum, painted in RAL 7022 (grey and brown). It is used for mounting KSR10 evacuated tube collectors on roofs or other planar surfaces with a slope less than 20° with respect to horizontal plane or horizontal plane itself provided it is solid (e.g. concrete). In case of placing the construction on the ground, a ground basis must be used for proper montage. It is a separate article (22.20.02), which consists of a pair of supports. | 22.32.02 |
 |
KSRL-1 Universal Construction (for an additional collector) is made of galvanized steel and aluminum, painted in RAL 7022 (grey and brown). It is used for mounting KSR10 evacuated tube collectors on roofs or other planar surfaces with a slope less than 20° with respect to horizontal plane or horizontal plane itself provided it is solid (e.g. concrete). When placing the construction on the ground, a ground basis must be used for proper montage. It is a separate article (22.20.02), which consists of a pair of supports . | 22.32.01 |
TARVIKKEET
| Kuva | Nimi | Tuotenro. |
 |
Connection set ZPKS
|
47.01.03 |
 |
KSL Masking Profile is dedicated to cover the break between flat plate collectors in a battery. It improves the aesthetics of the collectors by achieving a uniform plane and additionally it partially protects the connections between the collectors from atmospheric conditions. | 41.02.00 |
 |
ZPKR connection set enables complete connection of evacuated tube collectors with an installation piping system. | 47.02.01 |
 |
ZNP Expansions Vessel is to compensate for volume changes of the heat transfer fluid caused by changes in temperature of the fluid running in the solar circuit. In case of emergency, the vessel accumulates the fluid preventing from opening a safety valve or the degradation of the fluid. Capacity – 18 liters. Capacity – 24 litrs. (72.24.00) |
72.18.00 |
 |
Heater connection set PC 200-500 connection set is designed to connect the pump control unit with OKC 200,250,300,400,500 heaters. |
51.07.02 |
 |
Stainless steel elastic tube is used to connect the solar collectors to the heat receiving devices quickly and conveniently. Compared with other available products of this type, the threaded shape of the tube walls provides reduced resistance to the flow of the heat transfer fluid, reduced noise caused by the flowing fluid, and high fatigue resistance to multiple bending. Apart from solar technology, this tube can be used successfully in many other systems requiring hydraulic connections for central heating and hot water.The tube is made of austenitic stainless steel in ARMAFLEX insulation with a thickness of 13 mm (HT type), and with a sheet covering providing resistance to mechanical damage and ultraviolet radiation. It is delivered as standard in sections of length 50 m together with Flisil E flux (25 g). | 80.41.03 |
 |
Manual pump is used for filling the installation with heat transfer fluid. It is a manual piston air pump with a container of 3 dm3 capacity. The air overpressure created over the liquid surface in the expansion vessel forces the liquid to flow through drain valve to the installation. | 73.02.00 |
 |
Termsol Eko heat transfer fluid is a solution of water and non-toxic polypropylene glycol at 33% concentration. It also contains a set of inhibitors, which guarantee anticorrosion properties and extend longevity of the mixture and the whole solar installation. The freezing temperature is -25°C. Available in the size of 5 kg, 20 kg or 30kg. | 80.32.30 |
